Magnaflux EU
  •  

Click image to enlarge

  • 01-3123-ZL-2C-Group.jpg349735Image
  • 01-3123-40-ZL-2C.jpg1162050Image
  • 01-3123-45-ZL-2C.jpg931109Image

Product Data Sheet

Safety Data Sheet

Batch Certificate

Find a Distributor

ZL-2C

Level 2 Post Emulsifiable Fluorescent Penetrant

A medium sensitivity penetrant (Level 2), ZL-2C fluorescent post-emulsifiable penetrant is designed to be removed from the part surface by emulsifiers or solvent. With a UV-A light source, indications will appear as a bright green-yellow fluorescence. ZL-2C has a high flash point, and is designed to be used in open dip tanks.

ZL-2C is listed on the QPL SAE AMS 2644 Qualified Product List and is approved for use by Pratt & Whitney.

Benefits

  • Bright indications
  • Minimal background fluorescence
  • High flash point
  • QPL SAE AMS 2644 Qualified Product List
  • Approved for use by Pratt & Whitney

Ordering Information

5 gal / 18.9 L01-3123-40

55 gal / 208 L drum01-3123-45

Product Properties

NDT TypeFluorescent Penetrant Testing

Penetrant TypeType 1

Fluorescent Penetrant SensitivityLevel 2 - Medium Sensitivity

Penetrant MethodsMethod B, Method C

Removal TypePost Emulsifiable

Required EquipmentUV light source

Applications

Ideal ApplicationCastings, Extrusions, Forgings, Rough surface finish, Welds

Defect ExamplesCracks, Delamination, Laps, Porosity, Seams

Compliance

StandardsAECL, AMS 2644, ASME, ASTM E1417, NAVSEA T9074-AS-GIB-010/271, Pratt & Whitney PMC 4352, QPL SAE AMS 2644

Resources

Related Products

  • ZP-4D

    ZP-4D

    Dry powder developer for Form a penetrant testing and QPL SAE AMS 2644 approved.

  • ZP-5B

    ZP-5B

    Water suspendible developer for Form c penetrant testing, QPL SAE AMS 2644

  • ZP-9F

    ZP-9F

    Solvent-based developer for Type 1 Form d or Type 2 Form e penetrant testing, QPL SAE AMS 2644

  • SKC-S

    SKC-S

    NDT cleaner and remover for pre-cleaning before non-destructive testing and for removing excess surface penetrant

  • ZR-10E

    ZR-10E

    Hydrophilic emulsifier for Method D penetrant testing, QPL SAE AMS 2644 and Pratt & Whitney approved

  • ZE-4E

    ZE-4E

    Lipophilic emulsifier for Method B liquid penetrant testing, QPL SAE AMS 2644

  • ST700

    ST700

    Inspection-grade stationary flood LED UV-A lamp gives overhead black light for fluorescent NDT inspections

  • EV6000

    EV6000

    Portable, handheld LED UV lamp for black light inspection during fluorescent PT or MT testing

Subscribe to Magnaflux NDT Blogs:

Select Your Country North America Mexico Brazil China Europe India New Zealand, Australia, Japan, Southeast Asia
© 2024 Magnaflux - All Rights Reserved.
top