Click image to enlarge
The high-current Ferrotest mobile power packs provide both AC and HWDC magnetising currents from 1000 Amps up to 7100 Amps AC, and from 950 Amps to 5000 Amps DC.
Constant current magnetisation
Constant current is initiated upon operating a foot or hand switch. An electronic system regulates the test current from 0 to maximum in approx. 200 ms, which avoids unnecessary peak loading of the mains supply.
Impulse magnetisation
If the impulse operation is selected a sequence of single impulses is produced according to a factory-set on/off duty cycle of (1 s/1 s).
Demagnetisation
After selecting the demagnetisation setting, the test current is regulated from the set maximum value to 0 in approximately 600 ms.
NDT TypeFluorescent Magnetic Particle Testing, Visible Magnetic Particle Testing
Ideal ApplicationTesting at a fixed installation, Testing components that are too large or heavy to be inspected by standard fixed-position MPI equipment
StandardsDIN EN ISO 9934-3:2002, DIN VDE 0100-410:2007, DIN VDE 0100-540:2012, EN 60204-1:2006
Magnetic test bench for small parts
Magnetic test bench
Chain Inspection Unit to check chain links for surface cracks
Isotest mobile power packs for magnetic particle inspection
Subscribe to Magnaflux NDT Blogs:
Faraday Road, South Dorcan Industrial Estate
Swindon, Wiltshire, SN3 5HE, UK
Telephone: +44 (0)1793 524566
Contact Magnaflux Customer Service
Magnaflux, A Division of ITW Limited VAT number: GB 531 8325 59
