|Magnetic Particle Test Bar
||Contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens and complies with MIL-STD-271.
|AS 5282 Test Ring
||A magnetic particle test piece with pre-drilled holes to simulate subsurface defects. Complies with the following industry specifications:
- ASTM E709-08 (Sections 14.2.2, 20.6.7 & 20.8.4)
- ASTM E1444/E1444M-12 (Section 7.1.2, Annex A4)
- ASME Boiler & Pressure Vessel Code (Section V, Article 7: T-766.1)
- SAE AS5282
|Reference Block Type 1 according to EN ISO 9934-2 (MTU Test Block No. 3)
||After rinsing with test liquid, the MTU test block displays the extent to which the test liquid is able to deliver indications. Tested in accordance with EN ISO 9934-2; supplied with certificate and reference picture.
|Quantitative Quality Indicators (QQI)
QQI test pieces are used to verify field direction and relative strength. They also balance multi-directional fields and increase productivity by minimising magnetising shots. QQI test pieces are manufactured strictly in accordance with AISI 1005 - the applicable AMS standard for mild low-carbon steel, which is governed by SAE Aerospace Standard AS 5371. They also conform to ASTM E1444-05 and ASME Boiler & Pressure Vessel Code, Section V, Article 7-764.1.2.
Sold in sets of 5.
|625551 - KSC-230 Standard QQI
625552 - KSC-4-230 Miniature QQI
625554 - KSCT-234 Variable Depth QQI
|Magnetic Indicator Strips
||These strips help to determine the direction of magnetic fields at the precise point of their location. They comply with EN-ISO 9934-1:2001.
||008M004 - Type I for general use (G)