Frequently Asked Questions About NDT UV LED Lamps

  •  

Learn what a UV LED is, and what to consider when comparing hand-held and stationary overhead UV LED lamps

by David Geis, Product Manager

 

What is a NDT UV LED?

For NDT, UV-A is electromagnetic radiation in the near-ultraviolet range of wavelength with peak intensity at 365 nm (3650 A), referenced by ASTM E1316.

LEDs are a solid-state electronic component that generates light.  For NDT, UV-A LEDs must have the right spectrum (peak at 365 nm) and the right intensity to produce fluorescence in penetrants and magnetic particle materials.

Interested in comparing Magnaflux UV LEDs to each other? Check out our UV LED Comparison Guide.

 

When do I choose between an EV6000 and EV6500?

Pick the right tool for the job. If you need to comply with Aerospace specifications, pick the EV6000. If you need higher intensity UV for field inspection, or if you need a white light to prove up indications, pick the EV6500.

 

If I want to use a handheld lamp with the ST700, do I have to use the EV6500?

The ST700 provides broad area UV-A coverage. For close-up inspection of holes, bores, or complex geometries, a hand-held lamp may be needed to get the job done. Depending on your job specs, the EV6000 or the EV6500 can be used in conjunction with the ST700.

 

In the situation that I need more beam area than the ST700, what should I do?

Larger inspection areas may require multiple lamps to provide enough UV-A coverage. Several ST700 units can be tied together on a common circuit to operate them all from a single light switch. We would be happy to help you configure a custom inspection system.

 

Are LEDs difficult to replace?

All Magnaflux LED lamps have a comprehensive 1-year warranty against any failure. Replacing an LED assembly is not as simple as replacing a light bulb. Because the LEDs are very sensitive to static discharge, replacement of the assembly would be done by one of our Authorized Service Centers.

 

What’s the lifespan of LEDs? 

All Magnaflux LED lamps are officially rated at 10,000 hours continuous operation. This corresponds to our comprehensive 1-year warranty. The EV6000, EV6500, and ST700 lamps are designed to be extremely durable to stand up to real-world inspection environments, and will far out-last the official rating. The actual life of the lamp depends greatly on the environment and conditions where it’s used. 

 

Learn what to consider when looking for a new UV-A light for fluorescent penetrant testing or magnetic particle inspection.

 

  EV6000
Hand-held LED UV Lamp
EV6500
Hand-held, Dual-light LED UV Lamp
ST700
Stationary Inspection LED UV Lamp
 

Part Number

625784

Buy Now

626803

Buy Now

628243

Buy Now

Description UV-A Pass filter eliminates deep violet glare and provides highest inspection contrast High UV-A intensity gives bright fluorescent indications, and wide-angle white light mode prevents glare Broad and even coverage in both UV-A and white light modes, and full inspection intensity

 

Published May 15, 2018

JOIN OUR MAILING LIST TO RECEIVE THE LATEST NDT INSIGHTS AND ARTICLES FROM MAGNAFLUX

Want to stay up on the latest NDT insights and articles from Magnaflux? 

Subscribe to Magnaflux updates above to get fresh news delivered to your inbox once a week.

Please wait while we gather your results.

Related Blog Entries

Learn how to achieve a high intensity beam of light with UV LEDs for NDT inspection

NRTL: What Does It Mean and Why Does It Matter?

NRTL stands for Nationally Recognized Testing Laboratory, but what does that mean to you?

Read More...

Shedding Light on ASTM E2297 & E3022: A Guide to NDT UV Lamp Standards

An overview of two of the most common standards for NDT UV light sources, ASTM E2297 and ASTM E3022.

Read More...

How to Select the Right UV-A Lamp for Your NDT Needs [Checklist]

4 things to consider when looking for a new LED UV light for fluorescent penetrant inspection or magnetic particle testing.

Read More...

Why Does ASTM E3022 Require a Filter for LED UV Lamps?

Learn about the function and importance of UV-a pass filters, and why ASTM E3022 requires all LED UV-A lamps to have them.

Read More...

Handheld LED UV Lamps

About the EV6000 Handheld LED UV Lamp

Check out how Magnaflux’s EV6000 stacks against other leading UV-A portable handheld lamps in the market

Read More...

EV6000 Hand-held UV Lamp Demo and Q&A [Webinar]

Watch and listen to a 20-minute EV6000 demonstration by two outstanding NDT experts who afterwards host a 20-minute Q&A for participants to ask their own LED UV questions.

Read More...

ST700 Hood Mount is a freely-adjustable mounting frame

New Mounting System for Overhead UV-A Lamps

The ST700 Hood Mount is a freely-adjustable mounting frame to give operators the option to position their overhead UV-A Lamp to optimize inspection ease

Read More...

Magnaflux ST700 Overhead NDT Inspection Lamp

Stationary LED UV Lamp for NDT Inspections

See how the ST700 UV inspection lamp​ can eliminate the most common UV illumination challenges fluorescent NDT testing

Read More...

Learn how to achieve a high intensity beam of light with UV LEDs for NDT inspection

3 Facts About LED Optics and The Impact of Ultraviolet Light

Learn how to achieve a high intensity beam of light with UV LEDs for NDT inspection

Read More...

4 Monthly Checks Required for all LED Inspection-Grade Lamps

4 Monthly Checks Required for all LED Inspection-Grade Lamps

User-check requirements for LED UV-A lamps, and how to plot the beam of an LED UV-A lamp for Airbus AITM6-1001 Issue 11

Read More...

Complying with Airbus AITM requirements – How to check UV stability

Complying with Airbus AITM Requirements – How to Check UV Stability

Learn how to comply with the new requirements of the latest revision of Airbus AITM 6-1001

Read More...

Airplane Engine NDT

How to Improve Fluorescent NDT Process Control with LED UV Lighting [Case Study]

See how an aerospace OEM manufacturer increased NDT inspection reliability & control with wide-beam, overhead LED UV-A lamps

Read More...

ST700 High Volume Inspections

How to Increase High-Volume NDT Inspection Speed and Reliability with LED UV Lighting [Case Study]

See how an automotive parts manufacturer decreased inspection time and improved reliability with wide-beam, overhead UV lamps

Read More...

Dye Penetrant Testing on Pipe

NDT UV Lamps “Stabilize” vs “Warm Up”, What’s the Difference?

Understanding the difference between NDT mercury-vapor lamp “warm-up” time and LED black light “stabilization” time

Read More...

New High-Intensity, Dual-Light LED UV Lamp for NDT Pros

Learn about how the EV6500 UV lamp for nondestructive testing improves visibility & versatility while minimizing time to inspect parts

Read More...

ST700 Overhead Inspection UV Lamp

New Stationary LED Inspection UV Lamp for NDT Pros

Learn how this new UV lamp for nondestructive testing solves the biggest challenges in fluorescent NDT UV illumination.

Read More...

Why Do I Get Over 2 Foot-Candle / 20 Lux Visible Light from My LED UV-A Lamp?

Why Do I Get Over 2 Foot-Candle / 20 Lux Visible Light from My LED UV-A Lamp?

A quick history of the visible light emissions requirement, where it is today, and an overview of UV meters

Read More...

JOIN OUR MAILING LIST TO RECEIVE THE LATEST NDT INSIGHTS AND ARTICLES FROM MAGNAFLUX

Magnaflux

155 Harlem Avenue
Glenview, IL 60025, USA
Telephone: +1 847-657-5300
Contact Magnaflux Customer Service

Select Your Country North America Mexico Brazil China Europe India New Zealand, Australia, Japan, Southeast Asia
© 2024 Magnaflux - All Rights Reserved.
top