•  

ZR-10E

Hydrophilic Emulsifier

Designed to remove excess surface penetrant, ZR-10E minimizes surface background during Method D fluorescent penetrant testing while protecting indication integrity in critical component inspections. ZR-10E provides long tank life and excellent solution consistency for dependable, long-lasting performance in a variety of applications.

This Method D remover reduces fluorescent background on rough surfaces and minimizes penetrant bleed-out from hollow parts.

ZR-10E is tested and approved to AMS 2644 to work with Magnaflux PE penetrants ZL-2C Level 2ZL-27A Level 3 and ZL-37 Level 4 for verified penetrant system reliability.

ZR-10E is listed on the QPL SAE AMS 2644 Qualified Product List and is approved for use by Pratt & Whitney.

Benefits

Maximize penetrant inspection process control

  • PE penetrant system is less susceptible to human error since ZR-10E only works with rinse water to remove excess surface penetrant
  • Tested and confirmed per AMS 2644 to work with Magnaflux PE penetrants for verified penetrant system reliability
  • Maintains solution consistency for dependable performance with minimal agitation

Wide range of inspections

  • Flexible to work with many types of equipment and application methods
  • Inspect a wide range of high-value components without fear of corrosion or specification non-conformance
  • Meets all major industry and NDT specification requirements, including Aerospace Prime and OEM specs, AMS 2644 and ISO 3452

Features

  • Hydrophilic emulsifier
  • Reduces bleed-out on hollow parts
  • Lower concentration required
  • Resist degradation from bacteria, fungus or other contaminants
  • QPL SAE AMS 2644 Qualified Product List
  • Approved for use by Pratt & Whitney

Ordering Information

5 gal / 18.9 L01-3625-40

20 gal / 75.7 L drum01-3625-30

55 gal / 208 L drum01-3625-45

Product Properties

NDT TypeFluorescent Penetrant Testing, Visible Penetrant Testing

Penetrant TypeType 1, Type 2

Applications

Ideal ApplicationCastings, Detecting fine to very-fine discontinuities, High-stress parts, Investment castings, Precision components, Safety-critical components, Turbine engine blades, disks, etc.

Defect ExamplesCracks, Porosity, Scratches, Seams

Compliance

StandardsAECL, AMS 2644, AMS 2647, ASME BPVC, ASTM E1417, Boeing BAC 5423 PSD 6-46 or 8-4, Boeing PS-21202, GE P3TF2, GE P50YP107, Honeywell EMS 52309, NAVSEA T9074-AS-GIB-010/271, Pratt & Whitney 4355

Resources

Related Products

  • ZL-27A

    ZL-27A

    Level 3 post-emulsifiable fluorescent penetrant for Method B, Method C and Method D liquid penetrant testing, QPL SAE AMS 2644 and Pratt & Whitney approved

  • ZL-37

    ZL-37

    Level 4 post-emulsifiable fluorescent penetrant for Method B, Method C and Method D liquid penetrant testing, QPL SAE AMS 2644 and Pratt & Whitney approved

  • ZL-2C

    ZL-2C

    Level 2 post-emulsifiable fluorescent penetrant for Method B, Method C and Method D liquid penetrant testing, QPL SAE AMS 2644 and Pratt & Whitney approved

  • ZP-4D

    ZP-4D

    Dry powder developer for Form a penetrant testing and QPL SAE AMS 2644 approved.

  • ZP-5B

    ZP-5B

    Water suspendible developer for Form c penetrant testing, QPL SAE AMS 2644

  • ZP-9F

    ZP-9F

    Solvent-based developer for Type 1 Form d or Type 2 Form e penetrant testing, QPL SAE AMS 2644

  • ST700

    ST700

    Inspection-grade stationary flood LED UV-A lamp gives overhead black light for fluorescent NDT inspections

  • EV6000

    EV6000

    Portable, handheld LED UV lamp for black light inspection during fluorescent PT or MT testing

Subscribe to Magnaflux NDT Blogs:

Select Your Country North America Mexico Brazil China Europe India New Zealand, Australia, Japan, Southeast Asia
© 2024 Magnaflux - All Rights Reserved.
top