Magnaflux EU
  •  

Click image to enlarge

  • P-70.jpg426213Image

P-Series Product Data Sheet

MPI Equipment Checklist

Request a Quote

P-Series

Economical Power Pack Magnetic Current Generators

P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.

These portable electromagntic current generators are ideal for inspecting large or heavy parts, in-service mobile equipment or job-site weld testing with magnetic particle inspection NDT method.

P-Series power packs are availble in two configurations P-70 and P-1500 to meet a variety of mag particle inspection needs. Click on the tabs below for more details on these configurations.

Comparison

 

 

P-70

P-1500
Contact Current Capacity (amps)* AC 750 1,500
HWDC  750 1,500
Dimensions 17.5 x 9 x 7.5 in /
44.5 x 23 x 19 cm		 22 x 9.5 x 9.5 in /
56 x 24 x 24 cm
Weight 35 lb / 16 kg 93 lb / 42 kg

* Ratings based on use of two 15-foot lengths of 4/0 cable (30 feet total)

Benefits

  • Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
  • Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
  • Infinitely variable current control
  • Demagnetize parts in AC mode by slowly turning the current dial to zero
  • Built-in automatic-reset circuit breaker
  • May be used as the main power source for the Mag Kit modular bench inspection system
  • All P-70 and P-1500 portable power packs come with a 15 ft / 4.5 m remote control cable (PN 626797)

Part Numbers

Product Name Specifications Part Number
P-70
  • Length: 17.5" (44.5 cm)
  • Width: 9" (22.9 cm)
  • Height: 8" (20.3 cm)
  • Maximum Output*: 750 amps, AC or HWDC
  • Available Voltages: 115,230, 50 or 60 Hertz; single phase power
  • Line Current: 26 amps @ 115 VAC; 13 amps @ 230 VAC
  • Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
  • Unit Weight: 35 lbs (15.9 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately. 

115V: 628822

230V: 628826
P-1500
  • Length: 22" (55.9 cm)
  • Width: 9.5" (24.1 cm)
  • Height: 9.5" (24.1 cm)
  • Maximum Output: 1500 amps, AC or HWDC
  • Available Voltages: 230,460, 50 or 60 Hertz; single phase power
  • Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC
  • Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
  • Unit Weight: 93 lbs (42.2 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately. 

 230V: 628824

460V: 628825

 

Recommended Accessories:

  • 628833-180: 15 ft / 4.6 m 4/0 cable assembly with 628828 QC-F and 628829 QC-M quick connectors on each end
  • 169799: Pie field indicator

 

Ordering Information

P-70, 115V628822

P-70, 230V628826

P-1500, 230V628824

P-1500, 460V628825

Product Properties

NDT TypeFluorescent Magnetic Particle Testing, Visible Magnetic Particle Testing

Resources

Related Products

  • Consumables

    For magnetic particle inspection

  • Cables

    Cables

    For magnetic benches or electromagnetic current generators to work with any part size or application

  • Connectors

    Connectors

    For magnetic benches or electromagnetic current generators to work with any part size or application

  • Prods & Clamps

    Prods & Clamps

    Prods & clamps to magnetize a range of part shapes, configurations and sizes

  • Field Indicators

    Field Indicators

    Magnetic field indicators and Gauss meters for measuring magnetic field strength and direction

  • Magnetic Particle Test Pieces

    Magnetic Particle Test Pieces

    Magnetic particle performance evaluation devices measure magnetic particle performance

Subscribe to Magnaflux NDT Blogs:

Select Your Country North America Mexico Brazil China Europe India New Zealand, Australia, Japan, Southeast Asia
© 2024 Magnaflux - All Rights Reserved.
top